x5crni18-10 rod
Kailash Steel & Engg. are well-known Manufacturers Suppliers and Exporters of Round Bars in India. We provide a wide range of Round Bars Manufacturers in India. We offer different types of shapes, sizes, dimensions, specifications, and grades as per our client’s requirements. We also provide various types of grades such as Inconel, Monel, Hastelloy, Titanium, Nichrome, Nitronic, Nimonic etc.
Kailash Steel & Engg. are also Suppliers of Round Bars in all types of grades like Stainless Steel X5CrNi18-10 304 & 304l, stainless steel 316 & 316l, stainless steel 310 & 310s, inconel 600 Round Bars, inconel 600 Round Bars, Hastelloy C276 Round Bars, Hastelloy C22 sheets plates & coils, Hastelloy B2 / B3 Round Bars, Nitronic 50 sheets plates & coil, Nitronic 60 sheets plates & coil, Nimonic 80a sheets plates & coil etc. These are made by high grade of material.
We are Round Bars Suppliers in India. For more information on our Stainless Steel supplies, please take a look at our menu options above.
If you have any questions please contact our friendly team on +91-9840445963.
Round Bars Specification
| SHEETS & PLATES | SPECIFICATIONS |
|---|---|
Types | ROUND, FORGED, SQUARE, HEX, FLAT, ANGLE & MANY MORE |
Standard | ASTM A276, A484, A479 |
Size | 0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s. |
Surface | Hot Rolled(HR), Cold Rolled(CR), 2B, 2D, BA, NO. 1, NO. 4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching |
Stainless Steel | ASTM /ASME A/SA 213 / 249 / 269 / 312 / 358 CL. I to V - 304 , 304L , 304H, 309S ,309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L . |
Duplex Steel | ASTM/ASME A/SA 789, 790 - UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760. |
Nickel Alloys | Nickel Alloys 200, Nickel Alloys 201 |
Hastelloy | Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G |
Inconel | Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L |
types of sheets
| SURFACE | INTRODUCTION |
|---|---|
2B | Bright annealing finish obtained by a secondary light process which polishes rolls after No.2D is finished. It is most suitable for deep drawing that is not so severe. Polishing No.2D is even easier than before even after fabrication. It is recommended for this application to be done with (not limited to): medical equipment, milk tanks, cooking appliances, tableware and structural members |
BA | Very attractive finish by means of a heating treatment in an inert atmosphere furnace and then under goes a light cold process using polishing rolls after cold rolling. Due to its attractive finish, the BA finish is suitable for various decorative items and applications requiring unimpaired surface attractiveness after light fabrication. For pressed and formed products, simple buff-polishing can provide them with luster |
NO.3 | Comparatively rough polished finish (100-120 mesh). It is recommended for applications in which a semi-polished finish of the surface is required, such as jacket exterior of milk equipment and kitchen counter tops |
NO.4 | General polished finish, obtained by finalized polishing agents 150-180 mesh after No.2B finishes. It offers a uniform and attractive appearance. Commonly the product of the No.4 finish is used as is, but further high-grade finishes can be applied if required. The finish is clean and sanitary; it is suitable for milk and food processing equipment and medical equipment |
HL | Finish in which continuous abrasion lines are added to the No.4 finish. Repair after welding is easy and recommended. It is suitable for structural and similar applications |
| STAINLESS STEEL 304 SHEETS, COIL, FOIL AND PLATE SPECIFICATIONS: | |
|---|---|
| SPECIFICATION: | ASTM A240 / SA240 |
| STANDARD | JIS, AISI, ASTM, DIN, GB, EN, ETC |
| SURFACE | 2B, CR, HR, 2D, NO.4, NO.8, MIRROR, BA, NO.1, CHEQUERED, HAIRLINE, BRUSH, ETCHING, ETC. |
| WIDTH | 1000MM, 1219MM, 1250 MM, 1500MM, 2000MM AND Even as per Customers Requirements |
| LENGTH | 2000MM, 2500MM, 3000 MM, 5000MM, 6000MM AND Even as per Customers Requirements |
| THICKNESS | 0.05MM TO 150 MM |
| MANUFACTURER | JINDAL STAINLESS, POSCO, APERAM, OUTOKUMPU, TISCO, THYSSENKRUPP, ETC |
MANUFACTURERS SUPPLIERS OF X5CrNi18-10 SHEETS, COILS & PLATES IN INDIA
We, Kailash Steel & Engg. are Manufacturers & Suppliers of Stainless Steel X5CrNi18-10 Sheets, Coils & Plates in Mumbai, Pune, Vadodara, Rajkot, Delhi, Surat, Vapi, Hyderabad, Ahmedabad, Gujarat, Coimbatore, Chennai, Indore, Nagpur, Lucknow, Gwalior, Bareilly, Vijaywada and other major cities in India. We are Sheets, Coils & Plates Supplier in India. We are India’s leading Sheets, Coils & Plates Manufacturer and Supplier. We have our sales offices in different cities of India. Our head office is located in Mumbai and we supply Sheets, Coils & Plates to all major cities of India from Mumbai.
Manufacturers Suppliers of coils, sheets & plates in: | |||||
|---|---|---|---|---|---|
| Ambattur | Padi | Guindy | Sidco | Parrys | Athipet |
| Sriperumbudur | Ekkatuthangal | Gummidipoondi | Perambur | Maraimalai Nagar | Avadi |
| Ambattur Industrial Estate | Thirumudivakkam Industrial Estate | Sidco Industrial Estate | Guindy Industrial Estate | Korattur | Kundrathur |
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | kanpur |
| Thane | Bhopal | ||||
Exporters Manufacturers Of Sheets, Coils & Plates In India
Kailash Steel & Engg. are Exporters of Sheets, Coils & Plates in Saudi Arabia, Australia, Sri Lanka, Oman, Kuwait, Brazil, South Africa, United States, Venezuela, Singapore, United Kingdom, UAE, Qatar, Iran, Canada, Mexico, Nigeria, Malaysia, Turkey and more than 80+ countries. We, Kailash Steel & Engg. is one of the best Manufacturer Exporters of Sheets, Coils & Plates.
| Manufacturer Exporter of Flanges / Forged Fitting / Pipes and Tubes / Fasteners / Wire in: | ||||
|---|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran |
| Bahrain | Qatar | UAE | Africa | China |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom |
| United States | South Africa | Malaysia | Bangladesh | Turkey |
| Singapore | Sri Lanka | Australia | Brazil | |
1.4301 Stainless Steel Alloy
| Grade : | X5CrNi18-10 |
| Number: | 1.4301 |
| Standard: | EN 10088 – 2 : 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10088 – 3 : 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| Classification: | Austenitic stainless steels – standard grade |
| Equivalent grades: | AISI 304 UNS S30400 X5CrNi18-10 AISI304 |
Chemical composition % of the ladle analysis of grade X5CrNi18-10 (1.4301)
| Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polish-ability, a controlled sulphur content of 0.015 % max is recommended. Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. |
| C | Si | Mn | Ni | P | S | Cr | N |
| max 0.07 | max 1 | max 2 | 8 – 10.5 | max 0.045 | max 0.015 | 17.5 – 19.5 | max 0.11 |
| USA – | Germany DIN,WNr | Japan JIS | France AFNOR | England BS | China GB | Sweden SS | Poland PN | Finland SFS | Russia GOST | ||||||||||
|
|
|
|
|
|
|
|
|
|
Other designations of the grade:
OH18N9, 0H18N9, 00H18N10, OOH18N10, 1.4301, X5CRNI18-10, AISI 304, TP304, 1.4307, X 2 CRNI 18-9, AISI 304L, TP304L, UNS S30403, 304S11, 304S15, 304S16, 304S17, 304S31, 304S51, 304S71, SUS304, 1.4305, X 8 CRNIS 18-9, AISI 303, X12CRNIS18-8, Z8CNF18-09, Z4CN19-10, Z5CN17-08, Z6CN18-09, Z7CN18-09, Z2CN18-10, Z3CN18-09, Z3CN18-10, Z3CN19-09, Z3CN18-07AZ, J-304, STS304, 1.4306, X 2 CRNI 19-11, 1.4311, X2CRNIN18-10, AISI 304LN, UNS S30453, STAL 18-8, 18/8, 02CH18N11, 03CH18N11, 03CH18N9, 04CH18N10, 07CH18N10, 08CH18N10, 02CH18AN10, SUS304L, 07Х18Н10, 08Х18Н10, 02Х18Н11, 03Х18Н11, 02Х18АН10, X7CRNI18-10, 5NICR180, 18-8L, 18-9, SS2332, SS2333, X5CRNI19-9., 1.4404, 1.4401 & Many more!